南疆植被总初级生产力对区域降水的响应规律

为研究总初级生产力(Gross primary productivity,GPP)对区域降水的响应规律,本研究通过对南疆地区喀什、阿克苏、和田3个市2000—2014年的GPP进行分析,得出GPP的时空分布规律,进而与2000—2011年同期的降水进行耦合分析,以探寻植被GPP与降水之间的响应关系,从而为南疆地区植被生态保持和可持续发展提供依据。结果表明:1)从时间尺度来看,GPP呈现出与季节相关的波动性,年均GPP的极值点基本出现在每年的7月;2)在空间分布上,和田地区的GPP在空间上呈现北低南高的空间格局,阿克苏地区的GPP呈现北高南低的空间格局,并且在数值上存在较大的差异性,喀什地区的GPP呈现北高南低的空间格局,西北部GPP分布比较集中并有较高的值;3)变化趋势上,和田地区呈现上升趋势、阿克苏地区整体比较稳定、喀什地区呈现上升的趋势;4)研究区域内GPP与降水之间均为正相关关系。当降水滞后1个月时,和田及喀什GPP与降水之间的相关系数显著提高,但是阿克苏地区没有表现出时滞性,说明响应关系更加明显。     

不同类型烟草种质的烟碱含量变化与相关基因表达水平

为研究不同类型烟草种质的烟碱含量变化规律与相关基因的表达情况,以烤烟K326、香料烟巴斯玛、白肋烟TN90、晾烟马里兰为材料,采用荧光定量PCR技术,测定了烟草不同生育时期上部叶、中部叶、下部叶的烟碱含量与烟碱代谢过程中相关基因PMT、QPT、CYP82E5V2、A622的表达水平。结果表明,随着生育期的推进,烟碱含量缓慢上升,打顶后急剧增加,除巴斯玛打顶后还继续上升外,K326、TN90和马里兰烟均表现为:打顶后烟碱含量急剧增加,后缓慢下降,再渐趋平稳。不同类型烟草种质的PMT在不同生育期均有表达,苗期PMT表达量较高,其变化趋势与烟碱含量的基本一致;QPT在烟草发育前期表达量较高,而后下降,至打顶前1周表达量出现一个峰值,打顶后表达量持续增加,与烟碱含量变化呈正相关;CYP82E5V2表达量在不同生育时期均维持在较高水平,呈波浪型,生长旺期时表达量上升,打顶前后均出现峰值,但巴斯玛成熟期时其表达量下降,打顶前CYP82E5V2表达量与烟碱含量变化呈正相关,打顶后期至成熟期两者呈一定程度的负相关;K326和马里兰烟的A622表达量呈波浪型上升,至成熟时仍维持较高水平,而TN90和巴斯玛在打顶前后1周表达量较高,后表达下降再上升,成熟时表达量较低,与烟碱含量变化无明显一致性。     

武夷岩茶种质资源遗传多样性与亲缘关系的SRAP分析

本研究利用SRAP-PCR反应体系,从88对SRAP引物组合中筛选出43对引物组合,对武夷岩茶主要的30份种质资源进行SRAP分析,共扩增出385条带,其中具有多态性的有236条带,占总数的61.30%,表明30份武夷岩茶种质呈现一定的遗传多样性。武夷岩茶种质资源间遗传距离变幅在0.31~0.98之间,平均为0.63,基于SRAP标记利用系统聚类法把武夷岩茶分为三大类,为武夷岩茶遗传研究、品种选育与资源保护提供参考。     

Quantitative trait loci responsible for the difference in γ-oryzanol content in brown rice between japonica-type and indica-type rice cultivars

γ-Oryzanol is a main oleophilic component in rice bran oil and has been well recognized as a good dietary supplement for human health, as well as having uses in industrial materials. japonica-type rice cultivars generally showed significantly higher contents of total γ-oryzanol in brown rice compared with indica-type cultivars, although within-group variation was significant. The objective of this study was to explore quantitative trait loci (QTLs) responsible for the difference in the γ-oryzanol content between japonica-type and indica-type rice cultivars, using recombinant inbred lines (RILs), backcross inbred lines (BILs), and corresponding chromosome segment substitution lines (CSSLs) derived from crosses between japonica-type and indica-type. Results from RILs and BILs showed that eight QTLs were detected with R² from .09 to .16. Nine candidate regions for QTL were also suggested from corresponding CSSLs. These QTLs from RILs and BILs and the candidate regions from CSSLs were not overlapped, although one QTLs was mapped near the boundaries of the respective candidate region. At four QTLs and three candidate regions, alleles or segments from japonica-type caused higher contents than those from indica-type. On the other hand, at the other four QTLs and six candidate regions, alleles or segments from indica-type caused higher contents than those from japonica-type, which is a reverse result to the parental differences. This result strongly suggested that alleles with increasing effects on γ-oryzanol content could be accumulated not only from japonica-type but also from indica-type, leading to a potential for increase in γ-oryzanol content in future breeding programs.     

Establishing an eyeball-weight relationship for Litopenaeus vannamei using machine vision technology

This study aimed to establish a shrimp eyeball-weight relationship model for Litopenaeus vannamei using machine vision technology. A total of 295 shrimp were sampled from a recirculating aquaculture system (RAS). The long-axis length (d), body length (L), and body weight (W) of each individual was measured. The long axis length of the shrimp eyeball was identified and measured using machine vision technology. Continuous fitting and piecewise fitting models were used to construct the eyeball-weight relationship model for L. vannamei. The continuous fitting relationship model was described as: W = 38.865d^2.7914, while the piecewise model was described as: d < 2 mm, W = 0.0326d^3.7363, R² = 0.9288; 2 mm ≤ d < 3.9 mm, W = 0.0401d^3.104, R² = 0.9629; 3.9 mm ≤ d < 5.8 mm, W = 0.0421d^3.0311, R² = 0.9216; 5.8 mm < d, W = 0.103d^2.6226, R² = 0.9457. The root mean square error (RMSE) of the piecewise fitting model (0.0244, 0.1575, 0.5034, 0.7072) was smaller than the continuous fitting model (0.8229). The correlation coefficient (R²) of the piecewise model (0.9288, 0.9629, 0.9216, and 0.9457) was similar to that of the continuous fitting model (R² = 0.9621). The results indicated that the piecewise fitting model is suitable for calculating the biomass of L. vannamei in RAS and provides a novel way of estimating the biomass of L. vannamei cultured in RAS. The piecewise fitting model can also provide the foundation of evaluating the production of shrimp using underwater image recognition in intelligent aquaculture systems.     

A genetic linkage map in southern‐by‐spring oat identifies multiple quantitative trait loci for adaptation and rust resistance

We developed 178 recombinant inbred lines from a southern‐by‐spring oat population designated as “TxH.” These lines were genotyped to generate a high‐quality linkage map that resolved 6,902 markers into 21 linkage groups that matched closely with the latest hexaploid oat consensus map. Three major quantitative trait loci (QTLs) affecting heading date were found in locations that are consistent with known QTLs and candidate genes, and two other QTLs affecting heading date were found in novel locations. Five QTLs affecting plant height were found. Both sets of QTLs are responsible for transgressive segregation observed for these two traits. Four QTLs affecting resistance to crown rust, caused by the pathogen Puccinia coronata f. sp. avenae, were identified. Two of these QTLs are consistent with known clusters of rust resistance genes, while two may represent new locations of novel rust resistance genes. A complete set of SNP sequences suitable for generating markers for molecular selection is provided.     

Bulk pollen pollination in maize for efficient construction of introgression populations with high genome coverage

Introgression populations consist of a set of introgression lines or families, constructed by continuous backcrossing to the recurrent parent, while carrying a limited number of chromosome segments from a donor parent in their genomes. Increasing the genome coverage is an important aim when constructing introgression population. In this study, we proposed bulk pollen pollination (BPP) method and used it to increase the genome coverage of a maize introgression population. The results showed that the genome coverage of the introgression population constructed using BPP method reached 100% at BC₃ generation, which accorded with the simulation result. The BPP‐based BC₃F_1:2 population could identify most quantitative trait loci (QTL) detected using the F_2:3 population, especially major QTL. Simulation analysis showed that the genome coverage of introgression population increased with the increase of population size and the number of bulked plants, and decreased with the increase of backcross generation. Our results proved the reliability of the BPP‐based introgression population in increasing genome coverage and detecting QTL, and provided references for constructing high‐coverage introgression populations.